Categories
Newsletter
Weld in 200 series front DC coil over struts short
Product Code: weld200Fcoilover Units in Stock: 3
Weld in 200 series front DC coil over struts short Summary
New Improved design and finish
Weld in Shortened Front coilover struts for Volvo 200 series fitted with 70mm ID coilover springs. Supplied with bolt in camber plates and double bearing top mounts to reduce steering effort.
You need to remove the old strut tubes from your hubs and weld in the threaded cups.
These coilovers are built with a shorter closed length and shorter open length to allow for extreme lowering. Lowering range between 50 and 150mm
The spring platform is adjustable to change ride height and set corner weights..
Fitting notes
Tracking must be set after fitting
Welding must be completed by a competent welder. Classic Swede can not take responsibility for failure caused by poor quality welding.
Weld in Shortened Front coilover struts for Volvo 200 series fitted with 70mm ID coilover springs. Supplied with bolt in camber plates and double bearing top mounts to reduce steering effort.
You need to remove the old strut tubes from your hubs and weld in the threaded cups.
These coilovers are built with a shorter closed length and shorter open length to allow for extreme lowering. Lowering range between 50 and 150mm
The spring platform is adjustable to change ride height and set corner weights..
1. Front units adjust bump and rebound from a single control knob on the top of the unit. 24point adjustment
2. Double height adjustable
Fitting notes
Tracking must be set after fitting
Welding must be completed by a competent welder. Classic Swede can not take responsibility for failure caused by poor quality welding.
Updating Order Details
Please do not refresh or navigate away from the page!
Customer Reviews
No Reviews Posted Yet - be the first!(write review)